Catalog

Lightest, most economical connection. Uniform barrel with nut relief.

Thicker barrel and automatic nut stop. Sch 80 bore through 12 in.

Three steps of added reinforcement between HB and E.

Barrel OD equals flange OD. Most reinforcement of the standard family.

Barrel OD exceeds flange OD. You specify the OD.

Lip welds into the shell. Easier weld inspection and good toughness at the opening. Common for replacements and cyclic service.

Bottom matched to the shell or head ID. One weld, no grinding flush.

Flat bottom. Flexible projection, internal projection possible.

No flange. B16.25 bevel for a field flange or pipe.

Lowest-profile bolted connection. B16.5 drilling, tapped per UG-43.

B16.47 A/B, NPS 26–60, flanges and blinds.

Seamless rolled rings on our ring roll.

Solid discs, rough or machined.

Solid and punched blocks.

Square, butt-weld or closed ends, drilled holes, tapers.

Tubesheets, including flanged and drilled.

Rough and machined valve bodies and bonnets.

High-pressure manifold bodies.

Mandrel-forged rings and large valve seal rings.

Reducers, hubs, Y-blocks, specialty flow nozzles and bar.

Casing heads with side outlets, machined to customer print.

For example a 13⅝ in 5M × 11 in 10M tubing head.

Frac goat heads, forged and machined to order.

For example a 7 1/16 in 15M spool with 4 1/16 in 15M studded outlets, PSL-3.

Equal and reducing heavy-wall tees.

Heavy-wall laterals for high-pressure steam service.

Heavy-wall wyes with machined bores.

Forged and machined hemispherical heads.